有偿求助下腾讯云轻量配置HE tunnel 的免费ipv6【已解决】

radiogaga

Debian11
按照p3terx大佬的教程配置的 之前do机器配置成功过，尝试了下为腾讯云新加坡轻量配置 结果没有成功向大佬求助下
配置参考的教程：https://p3terx.com/archives/use-he-tunnel-broker-to-add-public-network-ipv6-support-to-ipv4-vps-for-free.html
腾讯云防火墙端口都全开了
15有偿 谢谢大佬

1. root@VM-8-14-debian:~# ifconfig
   
2. eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
   
3.         inet 10.0.8.14  netmask 255.255.252.0  broadcast 10.0.11.255
   
4.         inet6 fe80::5054:ff:fea1:3202  prefixlen 64  scopeid 0x20<link>
   
5.         ether 52:54:00:a1:32:02  txqueuelen 1000  (Ethernet)
   
6.         RX packets 49443  bytes 56472547 (53.8 MiB)
   
7.         RX errors 0  dropped 0  overruns 0  frame 0
   
8.         TX packets 25859  bytes 5313729 (5.0 MiB)
   
9.         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
   
10. 
    
11. he-ipv6: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1480
    
12.         inet6 2001:470:35:48d::2  prefixlen 64  scopeid 0x0<global>
    
13.         inet6 fe80::2b86:33fd  prefixlen 64  scopeid 0x20<link>
    
14.         sit  txqueuelen 1000  (IPv6-in-IPv4)
    
15.         RX packets 0  bytes 0 (0.0 B)
    
16.         RX errors 0  dropped 0  overruns 0  frame 0
    
17.         TX packets 0  bytes 0 (0.0 B)
    
18.         TX errors 11  dropped 0 overruns 0  carrier 11  collisions 0
    
19. 
    
20. lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
    
21.         inet 127.0.0.1  netmask 255.0.0.0
    
22.         inet6 ::1  prefixlen 128  scopeid 0x10<host>
    
23.         loop  txqueuelen 1000  (Local Loopback)
    
24.         RX packets 35  bytes 3712 (3.6 KiB)
    
25.         RX errors 0  dropped 0  overruns 0  frame 0
    
26.         TX packets 35  bytes 3712 (3.6 KiB)
    
27.         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    

复制代码

七枷社

local  改10.0.8.14  不能是公网IP
不要你钱了