全球主机交流论坛

 找回密码
 注册

QQ登录

只需一步,快速开始

CeraNetworks网络延迟测速工具IP归属甄别会员请立即修改密码
查看: 1758|回复: 16

[美国VPS] Scaleway 星辰安装Alpine 出问题?

[复制链接]
发表于 2023-4-27 11:33:57 | 显示全部楼层 |阅读模式
本帖最后由 august2077 于 2023-4-27 11:36 编辑

我按照帖子操作
https://hostloc.com/thread-1145636-1-1.html

进行第6步
“6.打开控制台(Console),没有意外会自动进入Alpine。”

无法进入Alpine,有大佬能帮忙下吗?

UEFI Interactive Shell v2.2                                                                                                     
EDK II                                                                                                                          
UEFI v2.70 (EDK II, 0x00010000)                                                                                                
Mapping table                                                                                                                  
     BLK0: Alias(s):                                                                                                            
          PciRoot(0x0)/Pci(0x1,0x0)/Floppy(0x0)                                                                                 
     BLK1: Alias(s):                                                                                                            
          PciRoot(0x0)/Pci(0x1,0x0)/Floppy(0x1)                                                                                 
     BLK2: Alias(s):                                                                                                            
          PciRoot(0x0)/Pci(0x4,0x0)                                                                                             
Press ESC in 1 seconds to skip startup.nsh or any other key to continue.                                                        
Shell>                                                                                                                          
                     
 楼主| 发表于 2023-4-27 11:38:11 | 显示全部楼层
.
  Station IP address is 10.70.3.23

  Server IP address is 10.194.3.9
  NBP filename is undionly.kpxe
  NBP filesize is 88751 Bytes
Downloading NBP file...

  NBP file downloaded successfully.

>>Start HTTP Boot over IPv4..

UEFI Interactive Shell v2.2                                                                                                     
EDK II                                                                                                                          
UEFI v2.70 (EDK II, 0x00010000)                                                                                                
Mapping table                                                                                                                  
     BLK0: Alias(s):                                                                                                            
          PciRoot(0x0)/Pci(0x1,0x0)/Floppy(0x0)                                                                                 
     BLK1: Alias(s):                                                                                                            
          PciRoot(0x0)/Pci(0x1,0x0)/Floppy(0x1)                                                                                 
     BLK2: Alias(s):                                                                                                            
          PciRoot(0x0)/Pci(0x4,0x0)                                                                                             
Press ESC in 1 seconds to skip startup.nsh or any other key to continue.                                                        
Shell>                                 
发表于 2023-4-27 11:42:07 来自手机 | 显示全部楼层
可以2G装个最小的debian9 没必要用这系统 属实用不习惯
发表于 2023-4-27 11:42:52 | 显示全部楼层
Mapping table                                                                                                                  
     BLK0: Alias(s):                                                                                                            
          PciRoot(0x0)/Pci(0x1,0x0)/Floppy(0x0)                                                                                 
     BLK1: Alias(s):                                                                                                            
          PciRoot(0x0)/Pci(0x1,0x0)/Floppy(0x1)                                                                                 
     BLK2: Alias(s):                                                                                                            
          PciRoot(0x0)/Pci(0x4,0x0)   

硬盘哪去了?硬盘都没检测到,重来吧。。
 楼主| 发表于 2023-4-27 11:57:15 | 显示全部楼层
从 Use rescue image 进入系统后,输入如下

Welcome to Ubuntu 22.04.2 LTS (GNU/Linux 5.15.0-69-generic x86_64)

* Documentation:  https://help.ubuntu.com
* Management:     https://landscape.canonical.com
* Support:        https://ubuntu.com/advantage

  System information as of Thu Apr 27 03:52:42 UTC 2023

  System load:    0.1650390625   Processes:             92
  Usage of /home: unknown        Users logged in:       0
  Memory usage:   19%            IPv4 address for ens2: 10.69.84.197
  Swap usage:     0%             IPv6 address for ens2: 2001:bc8:62c:262::1

  => /media/root-ro is using 96.5% of 1.96GB

Expanded Security Maintenance for Applications is not enabled.

0 updates can be applied immediately.

Enable ESM Apps to receive additional future security updates.
See https://ubuntu.com/esm or run: sudo pro status


The list of available updates is more than a week old.
To check for new updates run: sudo apt update
tmpfs-root /media/root-rw tmpfs rw,relatime,inode64 0 0
overlayroot / overlay rw,relatime,lowerdir=/media/root-ro,upperdir=/media/root-rw/overlay,workdir=/media/root-rw/overlay-workdir/_ 0 0
/dev/sda1 /media/root-ro ext4 ro,relatime 0 0


The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

root@scw-par:~# wget -qO- http://dl-cdn.alpinelinux.org/al ... t-3.11.9-x86_64.iso | dd of=/dev/vda
77824+0 records in
77824+0 records out
39845888 bytes (40 MB, 38 MiB) copied, 3.42086 s, 11.6 MB/s
root@scw-par:~# fdisk /dev/vda

Welcome to fdisk (util-linux 2.37.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

The device contains 'iso9660' signature and it will be removed by a write command. See fdisk(8) man page and --wipe option for more details.

Command (m for help): t
Partition number (1,2, default 2): 1
Hex code or alias (type L to list all): ef

Changed type of partition 'Empty' to 'EFI (FAT-12/16/32)'.

Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.

root@scw-par:~# lsblk
NAME    MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0     7:0    0  63.3M  1 loop /snap/core20/1852
loop1     7:1    0 111.9M  1 loop /snap/lxd/24322
loop2     7:2    0  49.8M  1 loop /snap/snapd/18596
sda       8:0    0   9.3G  1 disk
├─sda1    8:1    0   2.1G  1 part /media/root-ro
├─sda14   8:14   0     4M  1 part
└─sda15   8:15   0   106M  1 part /boot/efi
vda     252:0    0   1.9G  0 disk
├─vda1  252:1    0    38M  0 part
└─vda2  252:2    0   1.4M  0 part
 楼主| 发表于 2023-4-27 11:58:33 | 显示全部楼层
然后 power off,  Use local boot->Save, power on , 控制台显示

UEFI Interactive Shell v2.2
EDK II
UEFI v2.70 (EDK II, 0x00010000)
Mapping table
     BLK0: Alias(s):
          PciRoot(0x0)/Pci(0x1,0x0)/Floppy(0x0)
     BLK1: Alias(s):
          PciRoot(0x0)/Pci(0x1,0x0)/Floppy(0x1)
     BLK2: Alias(s):
          PciRoot(0x0)/Pci(0x4,0x0)
Press ESC in 1 seconds to skip startup.nsh or any other key to continue.
Shell>
发表于 2023-4-27 12:05:13 | 显示全部楼层
没必要用这个系统,我按照帖子安完了,但是系统几乎没法用
 楼主| 发表于 2023-4-27 12:33:28 | 显示全部楼层
baby不卑鄙 发表于 2023-4-27 12:05
没必要用这个系统,我按照帖子安完了,但是系统几乎没法用

尝尝鲜嘛,我第一次用
 楼主| 发表于 2023-4-27 12:34:29 | 显示全部楼层
流星 发表于 2023-4-27 11:42
Mapping table                                                                                        ...


我重新弄了一遍,还是相同的错误, 5楼是输出
发表于 2023-4-27 12:44:25 来自手机 | 显示全部楼层
august2077 发表于 2023-4-27 12:34
我重新弄了一遍,还是相同的错误, 5楼是输出

我没有poweroff poweron的操作,直接网页上点reboot的,不知道是不是这个区别
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|小黑屋|全球主机交流论坛

GMT+8, 2024-4-27 18:08 , Processed in 0.090449 second(s), 9 queries , Gzip On, MemCache On.

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表