nginx安装WP 出现500错误

won.cc

在线中，关注中，目前日志配置暂无帮助

cgs3238

执行如下命令 看下结果

1. grep -i fatal 日志文件地址

复制代码

cgs3238

没办法 贴的信息毫无帮助 望楼主自己搞定

老刘

函数被禁用了.....

被禁用的函数（disable_functions）：         passthru  exec  system  chroot  scandir  
chgrp  chown  shell_exec  proc_open  proc_get_status  
ini_alter  ini_restore  dl  openlog  syslog  
readlink  symlink  popepassthru  stream_socket_server  fsocket  

关键还是日志不全...

老刘

PHP版本（php_version）：        5.2.17

升级PHP,最新WP已经不支持这个版本了...

★Extreme★

汗，楼主把fpm的pool的配置文件贴出来！！
还有fcgi.conf

opear2008

自己安装一个面板

民工三代

fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
fastcgi_param  SERVER_SOFTWARE    nginx/$nginx_version;

fastcgi_param  QUERY_STRING       $query_string;
fastcgi_param  REQUEST_METHOD     $request_method;
fastcgi_param  CONTENT_TYPE       $content_type;
fastcgi_param  CONTENT_LENGTH     $content_length;

fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
fastcgi_param  REQUEST_URI        $request_uri;
fastcgi_param  DOCUMENT_URI       $document_uri;
fastcgi_param  DOCUMENT_ROOT      $document_root;
fastcgi_param  SERVER_PROTOCOL    $server_protocol;

fastcgi_param  REMOTE_ADDR        $remote_addr;
fastcgi_param  REMOTE_PORT        $remote_port;
fastcgi_param  SERVER_ADDR        $server_addr;
fastcgi_param  SERVER_PORT        $server_port;
fastcgi_param  SERVER_NAME        $server_name;

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param  REDIRECT_STATUS    200;

民工三代

<configuration>
  All relative paths in this config are relative to php's install prefix   
  <section name="global_options">
    Pid file   
    <value name="pid_file">/usr/local/php/logs/php-fpm.pid</value>
    Error log file   
    <value name="error_log">/usr/local/php/logs/php-fpm.log</value>
    Log level   
    <value name="log_level">notice</value>
    When this amount of php processes exited with SIGSEGV or SIGBUS ...   
    <value name="emergency_restart_threshold">10</value>
    ... in a less than this interval of time, a graceful restart will be initiated.   
    Useful to work around accidental curruptions in accelerator's shared memory.   
    <value name="emergency_restart_interval">1m</value>
    Time limit on waiting child's reaction on signals from master   
    <value name="process_control_timeout">5s</value>
    Set to 'no' to debug fpm   
    <value name="daemonize">yes</value>
  </section>
  <workers>
    <section name="pool">
      Name of pool. Used in logs and stats.   
      <value name="name">default</value>
      Address to accept fastcgi requests on.   
      Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket'   
      <value name="listen_address">/tmp/php-cgi.sock</value>
      <value name="listen_options">
        Set listen(2) backlog   
        <value name="backlog">-1</value>
        Set permissions for unix socket, if one used.   
        In Linux read/write permissions must be set in order to allow connections from web server.   
        Many BSD-derrived systems allow connections regardless of permissions.   
        <value name="owner"></value>
        <value name="group"></value>
        <value name="mode">0666</value>
      </value>
      Additional php.ini defines, specific to this pool of workers.   
      <value name="php_defines">
        <value name="sendmail_path">/usr/sbin/sendmail -t -i</value>
        <value name="display_errors">1</value>
      </value>
      Unix user of processes   
        <value name="user">www</value>
      Unix group of processes   
        <value name="group">www</value>
      Process manager settings   
      <value name="pm">
        Sets style of controling worker process count.   
        Valid values are 'static' and 'apache-like'   
        <value name="style">static</value>
        Sets the limit on the number of simultaneous requests that will be served.   
        Equivalent to Apache MaxClients directive.   
        Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi   
        Used with any pm_style.   
        <value name="max_children">5</value>
        Settings group for 'apache-like' pm style   
        <value name="apache_like">
          Sets the number of server processes created on startup.   
          Used only when 'apache-like' pm_style is selected   
          <value name="StartServers">20</value>
          Sets the desired minimum number of idle server processes.   
          Used only when 'apache-like' pm_style is selected   
          <value name="MinSpareServers">5</value>
          Sets the desired maximum number of idle server processes.   
          Used only when 'apache-like' pm_style is selected   
          <value name="MaxSpareServers">35</value>
        </value>
      </value>
      The timeout (in seconds) for serving a single request after which the worker process will be terminated   
      Should be used when 'max_execution_time' ini option does not stop script execution for some reason   
      '0s' means 'off'   
      <value name="request_terminate_timeout">0s</value>
      The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file   
      '0s' means 'off'   
      <value name="request_slowlog_timeout">0s</value>
      The log file for slow requests   
      <value name="slowlog">logs/slow.log</value>
      Set open file desc rlimit   
      <value name="rlimit_files">51200</value>
      Set max core size rlimit   
      <value name="rlimit_core">0</value>
      Chroot to this directory at the start, absolute path   
      <value name="chroot"></value>
      Chdir to this directory at the start, absolute path   
      <value name="chdir"></value>
      Redirect workers' stdout and stderr into main error log.   
      If not set, they will be redirected to /dev/null, according to FastCGI specs   
      <value name="catch_workers_output">yes</value>
      How much requests each process should execute before respawn.   
      Useful to work around memory leaks in 3rd party libraries.   
      For endless request processing please specify 0   
      Equivalent to PHP_FCGI_MAX_REQUESTS   
      <value name="max_requests">10240</value>
      Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.   
      Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)   
      Makes sense only with AF_INET listening socket.   
      <value name="allowed_clients">127.0.0.1</value>
      Pass environment variables like LD_LIBRARY_PATH   
      All $VARIABLEs are taken from current environment   
      <value name="environment">
        <value name="HOSTNAME">$HOSTNAME</value>
        <value name="PATH">/usr/local/bin:/usr/bin:/bin</value>
        <value name="TMP">/tmp</value>
        <value name="TMPDIR">/tmp</value>
        <value name="TEMP">/tmp</value>
        <value name="OSTYPE">$OSTYPE</value>
        <value name="MACHTYPE">$MACHTYPE</value>
        <value name="MALLOC_CHECK_">2</value>
      </value>
    </section>
  </workers>
</configuration>

tanyuxiang

The minimum requirements for WordPress 3.1 are PHP 4.3 and MySQL 4.1.2.